• / 88
  • 下载费用:15 赏金  

apqp - aiag manual

关 键 词:
APQPAIAGMANUAL
资源描述:
Property of Ford Motor Company Internal Use OnlyThe content of this document is the technical equivalent of SAE J-1739. Potential Failure Mode and Effects Analysis (FMEA) should be used by suppliers to companies subscribing to QS-9000 or equivalent document.POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS (FMEA)REFERENCE MANUALFirst Edition Issued February, 1993 • Second Edition, February, 1995 • Third Edition, July, 2001Copyright © 1993, © 1995, © 2001 DaimlerChrysler Corporation, Ford Motor Company, General Motors CorporationFOREWORD 1st and 2nd EditionThis reference Manual and Reporting Format was developed by the Failure Mode and Effects Analysis (FMEA) teams at Chrysler, Ford and General Motors, working under the auspices of the Automotive Division of the American Society for Quality Control (ASQC) and the Automotive Industry Action Group (AIAG).The ASQC/AIAG Task Force charter is to standardize the reference manuals, procedures, reporting formats and technical nomenclature used by Chrysler, Ford, and General Motors in their respective supplier quality systems. Accordingly, this manual and format, which is approved and endorsed by Chrysler, Ford and General Motors, should be used by suppliers implementing FMEA techniques into their design/ manufacturing processes.In the past, Chrysler, Ford and General Motors each had their own guidelines and formats for insuring supplier FMEA compliance. Differences between these guidelines and formats resulted in additional demands on supplier resources. To improve upon this situation, Chrysler, Ford and General Motors agreed to develop, and, through AIAG, distribute this Manual. The work group responsible for the Manual was led be George Baumgartner of Ford Motor Company.This Manual provides general guidelines for preparing an FMEA. It does not give specific instructions on how to arrive at each FMEA entry, a task best left to each FMEA team. This Manual also is not intended to be a comprehensive FMEA reference source or training document.While these guidelines are intended to cover all situation normally occurring either in the design phase or process analysis, there will be questions that arise. These questions should be directed to your customer's Supplier Quality Assurance (SQA) activity. If you are uncertain as to how to contact the appropriate SQA activity, the buyer in your customer's Purchasing office can help.The Task Force gratefully acknowledges: the leadership and commitment of Vice Presidents Thomas T. Stallkamp at Chrysler, Norman F. Ehlers at Ford, and J. Ignasio Lopez de Arriortua of General Motors; the assistance of the AIAG in the development, production, and distribution of the Procedure; the guidance of Task Force principals Russ Jacobs (Chrysler), Steve Walsh (Ford), Dan Reid (General Motors), and Rad Smith; and the assistance of the ASQC Automotive Division Reading Team. This team, led by Tripp Martin (Peterson Spring), reviewed the Manual for technical content and accuracy and made valuable contributions to form and content. Since the Manual was developed to meet specific needs of the automotive industry, the ASQC voluntary standards process defined by ASQC policies and procedures was not used in its development.Additional copies can be ordered from AIAG and/or permission to copy portions of this Procedure for use within supplier organizations should be obtained from AIAG at 248-358-3003.Property of Ford Motor Company Internal Use Only
展开阅读全文
  众赏文库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。
关于本文
本文标题:apqp - aiag manual
链接地址:https://www.xueshudoc.com/p-7140003.html
关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服客服 - 联系我们

浙公网安备 33010902002192号

众赏文库提供毕业设计,机械图纸源码,实习报告等文档下载

收起
展开